6 Select the copy mode:• Press to switch to color mode.• Press to switch to black‑and‑white mode.When you select color or black‑only printing, the light that corresponds to your choice comes on.7 Press .Note: The selected copy settings are reset to the factory default after two minutes of printer inactivity.Copying an ID card1 Load plain A4‑ or letter‑size paper.2 From the printer control panel, navigate to:> Copy > > ID Card Copy3 Press , and then load the front side of the ID card facedown at the placement corner of the scanner glass.4 Press .5 When prompted to copy the back side of the ID card, press the left or right arrow button to scroll to Yes, and thenpress .6 Load the back side of the ID card facedown at the placement corner of the scanner glass, and then press .Enlarging or reducing images1 Load paper.2 Load the original document facedown on the scanner glass.3 From the printer control panel, navigate to:> Copy > > Scale4 Press the left or right arrow button to scroll to the Scale setting you want.Notes:• If you select Custom %, then press , and then press the left or right arrow button to select a custompercent value. Press to save the setting.• If you select Borderless, then the printer will reduce or enlarge the document or photo as necessary to printa borderless copy on the paper size that you selected. For best results with this setting, use photo paper andset the paper type to Photo.• If you select Fit to Page, then the printer scales the document or photo proportionately to fit a single page.5 Press .Adjusting copy quality1 Load paper.2 Load the original document faceup into the ADF or facedown on the scanner glass.Copying 50
