Replacing the battery-statuslight cableWARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps inBefore working inside your computer. After working inside yourcomputer, follow the instructions in After working inside yourcomputer. For more safety best practices, see the RegulatoryCompliance home page at www.dell.com/regulatory_compliance.Procedure1 Adhere the battery-status light cable to the palm-rest assembly.2 Route the battery-status light cable and adhere it to the palm-restassembly.3 Slide the battery-status light cable into the battery-status light cableconnector and press down on the latch to secure the cable.4 Adhere the tape that secures the battery-status light cable to thekeyboard-controls board.Post-requisites1 Replace the battery.2 Replace the base cover.38
