Removing the I/O boardWARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps inBefore working inside your computer. After working inside yourcomputer, follow the instructions in After working inside yourcomputer. For more safety best practices, see the RegulatoryCompliance home page at www.dell.com/regulatory_compliance.Prerequisites1 Remove the base cover.2 Remove the battery.Procedure1 Remove the screws that secure the I/O board to the palm-rest assembly.2 Peel off the tape that secures the display cable to the I/O board.3 Disconnect the media-card reader cable from the I/O board.46
