Replacing the touch padWARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps inBefore working inside your computer. After working inside yourcomputer, follow the instructions in After working inside yourcomputer. For more safety best practices, see the RegulatoryCompliance home page at www.dell.com/regulatory_compliance.Procedure1 Align the screw holes on the touch pad with the screw holes on thepalm-rest assembly.2 Replace the screws that secure the touch pad to the palm-rest assembly.3 Slide the touch-pad cable into the system board and press down on thelatch to secure the cable.4 Route the touch-pad cable and adhere the cable to the palm-restassembly and keyboard.Post-requisites1 Replace the battery.2 Replace the base cover.42
