Removing the displayassemblyWARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps inBefore working inside your computer. After working inside yourcomputer, follow the instructions in After working inside yourcomputer. For more safety best practices, see the RegulatoryCompliance home page at www.dell.com/regulatory_compliance.Prerequisites1 Remove the base cover.2 Remove the battery.Procedure1 Disconnect the touch-screen cable (optional) and camera cable from thesystem board.2 Peel off the tape that secures the antenna cables to the system board.3 Remove the screw that secures the wireless-card bracket to the systemboard.4 Lift the wireless-card bracket off the wireless card.54