18 | Replacing the System BadgeReplacing the System BadgeWARNING: Before working inside your computer, read the safety informationthat shipped with your computer and follow the steps in "Before You Begin" onpage 9. After working inside your computer, follow the instructions in"After Working Inside Your Computer" on page 11. For additional safety bestpractices information, see the Regulatory Compliance Homepage atdell.com/regulatory_compliance.Procedure1 Slide the tapes on the system badge into the slots on the base-cover assembly.2 Slide the tabs on the system badge into the slots on the base-cover assembly andsnap the system badge into place.3 Turn the base-cover assembly over.4 Peel the stickers from the tapes and adhere the tapes to secure the system badge tothe base-cover assembly.Postrequisites1 Follow the instructions from step 2 to step 6 in "Removing the Base Cover" onpage 12.
