14 Remove the solid-state drive.ProcedureNOTE: To avoid any potential damage to the cables, ensure to release themfrom the routing guides.1 Using the pull tab, disconnect the display cable from the system board.2 Disconnect the camera cable from the system board.3 Disconnect the touch cable (applicable only for systems with the touch screenoption) from the system board.4 Using the pull tab, disconnect the media-card reader cable from the systemboard.5 Disconnect the hard-drive power cable from the system board.6 Disconnect the hard-drive data cables from the system board.7 Disconnect the microphone cable from the system board.8 Disconnect the speaker cable from the system board.9 Disconnect the converter-board cable from the system board.113
