Replacing the solid-state driveWARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps in Beforeworking inside your computer. After working inside your computer, followthe instructions in After working inside your computer. For more safety bestpractices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.CAUTION: Solid-state drives are fragile. Exercise care when handling thesolid-state drive.Procedure1 Align the notch on the solid-state drive with the tab on the solid-state drive slot.2 Slide the solid-state drive into the solid-state drive slot.3 Secure the solid-state drive to the system board using the securing clip.Post-requisites1 Replace the system-board shield.2 Replace the back cover.3 Replace the USB dongle-bay cover.54