Replacing the display assemblyWARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps in Beforeworking inside your computer. After working inside your computer, followthe instructions in After working inside your computer. For more safety bestpractices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.Procedure1 Open the latch and connect the display cable to its slot on the middle frame.2 Connect the backlight cable to its slot on the middle frame.3 Connect the converter-board cable to its slot on the middle frame.Post-requisites1 Replace the display built-in self test button board.2 Replace the system board.3 Replace the camera.4 Replace the media-card reader.5 Replace the power-button board.6 Replace the speakers.7 Replace the converter board.8 Replace the solid-state drive.9 Replace the coin-cell battery.10 Replace the hard-drive cage.11 Replace the processor.12 Replace the processor heat-sink.13 Replace the I/O panel.14 Replace the microphones.15 Replace the inner frame.16 Replace the memory fan.120
