68 Using Multimedia7 Click the arrows beside the Audio listening mode setting to scroll through the options, and select theCL Headphone option.8 Click the arrows beside the Dynamic range compression option to select the most suitable option.9 Click the Back button once, and then click the Back button again to return to the main menu screen.Enabling the Display Settings for a TV in Microsoft® Windows® XPVideo ControllerNOTE: To ensure that the display options appear correctly, connect the TV to the computer before you enable thedisplay settings.1 Click the Start button, point to Settings, and then click Control Panel.2 Double-click Display and click the Settings tab.3 Click Advanced.4 Click the tab for your video card.NOTE: To determine the type of video card installed in your computer, see the Windows Help and Support Center.To access the Help and Support Center, click Start→ Help and Support. Under Pick a Task, click Use Tools to viewyour computer information and diagnose problems. Then, under My Computer Information, select Hardware.5 In the display devices section, select the appropriate option for using either a single display or multipledisplays, ensuring that the display settings are correct for your selection.Sound ModesYour computer is designed to run on two different sound modes—stereo and 5.1 surround sound.Stereo Sound ModeYour computer ships with stereo sound mode as the default. For this mode, the computer is equippedwith two different headphone connectors and a microphone/line-in connector at the front of thecomputer. You can simultaneously use two sets of headphones or other sound output devices and amicrophone or other sound input device.5.1 Surround Sound ModeTo switch to 5.1 surround sound mode, you need to connect a speaker’s three differently colored cableconnectors—green, yellow, and black—to the headphone and microphone connectors at the front of thecomputer.NOTE: You must connect the speaker’s black cable connector first or the 5.1 surround sound mode does not work.1 Connect the speaker’s black cable connector to the microphone/line-in connector at the front of thecomputer.A pop-up menu appears, giving the status of which connectors are plugged in to each jack.
