6. Replace the drive panel (see Installing the Drive Panel).7. Replace the computer cover (see Replacing the Computer Cover).8. Connect your computer and devices to electrical outlets, and then turn them on.Installing a Media Card Reader1. Follow the procedures in Before You Begin.2. Remove the computer cover (see Removing the Computer Cover).3. Remove the drive panel (see Removing the Drive Panel).4. Remove the existing media card reader, if applicable (see Removing a Media Card Reader).5. If no screws are attached to the Media Card Reader, check the inside of the drive panel for shoulder screws. If screws are present, attach the screws tothe new card reader.6. Slide the Media Card Reader into the drive bay until it clicks into place.7. Attach the power and data cables to the back of the Media Card Reader.8. Check all cable connections and fold cables out of the way to avoid blocking airflow between the fan and cooling vents.9. Replace the drive panel (see Installing the Drive Panel).1 drive-release latch 2 media card readerNOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.1 media card reader 2 shoulder screws (4)1 drive-release latch 2 media card reader