Delphi Display Systems RDS-INSFTTCU Configuration And User's Manual
                                                                                  | |
Contents
| 
Delphi Display Systems, Inc. RDS-INSFTTCU Page 28 of 82Confidential Document:Do not copy or distribute without written permission from Delphi Display Systems, Inc.Copyright 2012. [Unpublished Work]. All rights reserved4.7.2 Access CodeThis lets you secure your Fast Track ® Timer from unauthorized access.You may assign up to four Access Codes, identified as A, B, C, and D.An unused access code is displayed as “UNUSED” and a used accesscode is displayed as “SET”. When no access code has been set, thedefault code is “000000”. Once any of the access codes has been set,however, the default access code “000000” no longer allows access.Note: If any or all of the access codes has been changed, you mustchange the access code in Site (See – Section 4.2 Site) to match anyaccess code A – D with the new change. Otherwise, you will receive an“invalid access code” when you try to connect to the Fast Track ® Timer.4.7.3 Night MgrNight Manager allows you to set up a time period to track particularevents over a period of time, as well as identify problems and theircauses (which is particularly useful for absentee management), to viewor print at the Fast Track ® Timer(printing applies only to 2000 seriestimers).The Fast Track ® Timer only uses these times in fifteen minuteincrements and uses AM and PM. When setting the time for store hoursthe software will compensate for times such as 6:22 and willautomatically set that value to 06:15 AM. The program will always moveback to the closest fifteen-minute interval. You can use either an A or aP to designate AM or PM. An example would be 6:00p or 18:00 will bothgive you 06:00PM. If you set the time for 12:00 this will give you12:00PM and 00:00 will give you 12:00AM. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine