Delphi Display Systems RDS-INSFTTCU Configuration And User's Manual
                                                                                  | |
Contents
| 
Delphi Display Systems, Inc. RDS-INSFTTCU Page 31 of 82Confidential Document:Do not copy or distribute without written permission from Delphi Display Systems, Inc.Copyright 2012. [Unpublished Work]. All rights reserved~~ WARNING ~~The caution box surrounding the check box for Multi-Station Config is a warning to the user thatthe Fast Track ® Timer’s data can be distorted when the new configuration of selected box ischecked is uploaded to the Fast Track ® Timer during operational hours. The best time to uploadthis information is during the hours that the drive-thru window is closed. For more informationand guidance please contact Delphi Display Systems.4.7.6 Multi-Station ConfigThe Multi-Station events which are created in Event Labeling isconfigured in this screen. Select from the pull-down list the multi-stationevent you want to configure. A list of the single station events is listed inthe Events column. From the Begin column choose which single stationyou want to start the multi-station event by clicking on the button. Thebutton’s face changes from a blank button to a button with an ‘A’ forarrival or a ‘D’ for departure. Then stop the multi-station time by placingan ‘A’ for arrival ‘D’ for departure in the End column of another singlestation event. This will display the averages of the multi-station eventyou created in the activity screen of the Fast Track ® Timer.You cannot use GREET to setup a Multi-Station event.Check the ‘Display Cars in Lane’ box to display the number of cars inthe drive-thru lane.The Max Cars is the number of cars that a Drive-Thru lane is capable ofholding. Valid numbers are 1-16.The ALT/MAIN Config button toggles between the MAINCONFIGURATION and ALT CONFIGURATION Multi-Station Configsettings.4.8 ConnectWhen you select Connect from the Menu Bar, a standardwindow Connect to Site dialog box opens up allowing youto connect to a Fast Track ® Timer.To connect to a Fast Track ® Timer, choose a site from themenu list and click on Connect. Once you’re connected,click OK to dismiss the window. The Connect selection inthe Menu Bar becomes inactive and the Disconnectselection becomes active.The site data will be displayed after you have connectedwith the Fast Track ® Timer. The display will show the FastTrack ® Timer’s serial number, version number, and if theRS Port and the Warranty is enabled or disabled with theexpiration date. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine