Delphi Display Systems RDS-INSFTTCU Configuration And User's Manual
                                                                                  | |
Contents
| 
Delphi Display Systems, Inc. RDS-INSFTTCU Page 37 of 82Confidential Document:Do not copy or distribute without written permission from Delphi Display Systems, Inc.Copyright 2012. [Unpublished Work]. All rights reserved4.10.7 Remove CarTHIS FEATURE REQUIRES AN ACCESS CODE FOR ENTRYThe Remove Car screen lets you manually synchronize the Fast Track ® 3000 Series Timer. You will rarelyneed this option, however, as the Timer normally synchronizes itself.Start from MENU Screen (See – Section 4.10.6 Menu). The field is on [Remove Car From Lane]:1. Click: . You are prompted to enter an Access Code.2. Enter your six-digit Access Code. You are now in the Remove Car screen.1. Click: or or or to move to the station you want to adjust.2. Click: . The car count is now decreased by one (to the right of the = sign).4.10.8 Reset LoopTHIS FEATURE REQUIRES AN ACCESS CODE FOR ENTRYThis screen lets you manually reset an internal Fast Track ® 3000 Series Timer Loop Detector thatremained ON. This action should rarely be required. If this happens regularly, call your local servicecompany to investigate and make necessary repairs.NOTE: Reset Loop feature should only be used when an L light is on and there is no car at that particulardetection point. Example: L4 is on, the Timer is running, but no cars are in the drive-thru lane for thatparticular detection point. Generally, L1 and L2 – when used for Menu and Greet – cannot be reset from theFast Track Timer. Reset loop is for internal loop detection only. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine