ASDA-A2 Chapter 1 Unpacking Check and Model Explanation1-8 Revision September 2012The drives shown in the above table are designed according to the three multiple of ratedcurrent of motors shown in the above table. If the drives which are designed according to thesix multiple of rated current of motors are needed, please contact our distributors or yourlocal Delta sales representative.1.3.2 400V SeriesPower Servo Drive Servo Motor750W ASD-A2-0743- ECMA-J10807S (S=19mm)1.0W ASD-A2-1043- ECMA-K11310S (S=22mm)1.5W ASD-A2-1543- ECMA-K11315S (S=22mm)2.0W ASD-A2-2043- ECMA-K11320S (S=22mm)3.0W ASD-A2-3043- ECMA-L△1830S (S=35mm)4.5W ASD-A2-4543- ECMA-L11845S (S=35mm)5.5W ASD-A2-5543- ECMA-L118553 (3=42mm)7.5W ASD-A2-7543- ECMA-L118753 (3=42mm)11kW ASD-A2-1B43- ECMA-L1221B3 (3=42mm)15kW ASD-A2-1F43- ECMA-L1221FS (3=55mm)NOTE1) The boxes () at the ends of the servo drive model names are for optional configurations (Full-closed Control, CANopen, DMCNET, Extension Port for Digital Input and Electronic Cam).For the actual model name, please refer to the ordering information of the actual purchasedproduct.2) The boxes (△) in the model names are for encoder resolution types (△=1: Incremental encoder,20-bit; △=2: Incremental encoder, 17-bit). The boxes () in the model names are for optionalconfigurations (keyway, brake and oil seal).The drives shown in the above table are designed according to the three multiple of ratedcurrent of motors shown in the above table. If the drives which are designed according to thesix multiple of rated current of motors are needed, please contact our distributors or yourlocal Delta sales representative.The servo drives shown in the above two tables are designed for use in combination with thespecific servo motors. Check the specifications of the drives and motors you want to use.Also, please ensure that both the servo drive and motor are correctly matched for size (powerrating). If the power of motor and drive is not within the specifications, the drive and motormay overheat and servo alarm would be activated. For the detail specifications of servo drivesand motors, please refer to Chapter 11 “Specifications”.
