Denon ASD-3W - Digital Player Docking Station Owner's Manual

Also see for ASD-3W - Digital Player Docking Station: Specifications Compabilities Guide Dimensions Errata Owner's manual

Contents

ENGLISHGetting Started Connections Playback Information TroubleshootingSetup1 Fitting a rod antenna (vpage 8).b If a LAN cable is connected, remove it.2 Plug the ASD-3W’s AC adapter into awall socket (vpage 7).3 Set the access point at the GUI menu“Setup” – “Network” – “NetworkSetup”.When searching access points to connectautomatically, refer to “Automatic settings”.When searching access points to connectmanually, refer to “Manual settings”.n Automatic settingse Use ui p to input the address and pressENTER.IP Address :Set the IP address within the ranges shownbelow. The Network Audio function cannot beused if other IP addresses are set.CLASS A: 10.0.0.0 ~ 10.255.255.255CLASS B: 172.16.0.0 ~ 172.31.255.255CLASS C: 192.168.0.0 ~ 192.168.255.255Subnet Mask :When connecting an xDSL modem or terminaladapter directly to the ASD-3W, input the subnetmask indicated in the documentation supplied byyour provider. Normally input 255.255.255.0.Default Gateway :When connected to a gateway (router), input itsIP address.Primary DNS Secondary DNS :If there is only one DNS address indicated in thedocumentation supplied by your provider, input itat “Primary DNS”. If there are two or more DNSaddresses, input the first one at “SecondaryDNS”.r Use i to select “Exit” and press ENTER.Setup is complete.b When connecting to the network via a Proxyserver, select “Proxy” and press ENTER (vpage16 “Proxy settings”).Wireless LAN settingsUse this procedure to configure the Wireless LANsettings.w Select the access point.Example) DENONq Select “Search”.q Select “Search” and press ENTER.The access point you have set is displayed.w Use ui to select the access point, and thenpress ENTER.b If the access point is not detected automatically,use the “Manual settings” procedure (vpage14, 15).b If the access points are repeat search, use i toselect the “Search” and press ENTER.Select whensearching accesspoints again.