Denon AVR-1803 Operating Instructions Manual

Also see for AVR-1803: Brochure & specs Operating instructions Operating instructions Operating instructions

Denon AVR-1803 Operating Instructions Manual Manual pdf 19 page image

ENGLISH1910 SETTING UP THE SYSTEM• Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 9 to 17), make thevarious settings described below on the display.These settings are required to set up the listening room’s AV system centered around the this unit.• Use the following buttons to set up the system:SYSTEM SETUP buttonPress this to display the system setup on the display.CURSOR buttons (•, ª, 0, 1)Press this change what appears on the display.ENTER buttonPress this to switch the display.Also use this button to complete the setting.1 Set the slide switch to “AUDIO”.2 Use the following buttons to set up the system:• System setup items and default values (set upon shipment from the factory)NOTE:• The system setup is not displayed when “HEADPHONE ONLY” is selected.System setup Default settingsSpeakerConfigurationSubwoofer modeDigital InAssignmentAuto SurroundModeInput the combination of speakers in your system and theircorresponding sizes (SMALL for regular speakers, LARGE for full-size, full-range) to automatically set the composition of the signalsoutput from the speakers and the frequency response.This selects the subwoofer speaker for playing deep bass signals.This assigns the digital input jacks for the differentinput sources.Auto surround mode function setting.InputsourceDigitalInputsFront Sp.LargeCenter Sp. SubwooferSurround Sp.Small YesSmallNormalFront & Subwoofer Center Surround L & R12 ft (3.6 m) 12 ft (3.6 m) 10 ft (3.0 m)CD DVD/VDP TV/DBS VCR-1 VCR-2 CDR/TAPE —COAXIAL OPTICAL 1 OPTICAL 2 OFF OFF OPTICAL 3 —Auto Surround Mode = ONSurround Back Sp.SmallDelay TimeThis parameter is for optimizing the timing with which the audiosignals are produced from the speakers and subwoofer according tothe listening position.Surround Back10 ft (3.0 m)CrossoverFrequencySet the frequency (Hz) below which the bass sound of the variousspeakers is to be output from the subwoofer. 80 HzVideo InAssignmentThis assigns the component video input jacks for thedifferent video input sources.InputsourceComponentInputsDVD/VDP TV/DBS VCR-1 VCR-2 V. AUX —VIDEO 1 VIDEO 2 OFF OFF OFF —Ext. In SW Level Set the Ext. In Subwoofer channel playback level. Ext. In SW Level = +15 dB