Denon AVR-1803 Operating Instructions Manual

Also see for AVR-1803: Brochure & specs Operating instructions Operating instructions Operating instructions

Denon AVR-1803 Operating Instructions Manual Manual pdf 20 page image

ENGLISH20Before setting up the system12 Press the SYSTEM SETUP button to enter the setting.Check that all the components are correct, then press the POWER operation switch on the main unit orthe POWER button on the remote control unit to turn on the power.3 Press the ENTER or (down) button to switch to the speaker configuration set up.*SYSTEM SET UPNOTE:Press the SYSTEM SETUP button again to finish system set up. System set up can be finished at any time. The changes to the settings madeup to that point are entered.NOTE: Please make sure the “AUDIO” position of the slide switch on the remote control unit.(Main unit) (Remote control unit)Setting the speaker configuration1 Use the (left) and (right) buttons to select your front speaker type.1 FRONT LARGE LARGE SMALL(left) button (right) buttonPress the ENTER or (down) button to switch to the center speaker setting.2 Use the (left) and (right) buttons to select your center speaker type.2 CENTER SMALL LARGE SMALL NONE(left) button (right) buttonPress the ENTER or (down) button to switch to the surround speaker setting.3 Use the (left) and (right) buttons to select your surround speaker type.3 SURR. SMALL LARGE SMALL NONE(left) button (right) buttonPress the ENTER or (down) button to switch to the surround back speaker setting.NOTE:• When “Small” has been selected for the front speakers, “Large” cannot be selected for the center speaker.(Initial)(Initial)(Initial)NOTE:• When “Small” has been selected for the front speakers, “Large” cannot be selected for the surround speakers.