Denon AVR-1803 Operating Instructions Manual

Also see for AVR-1803: Brochure & specs Operating instructions Operating instructions Operating instructions

Denon AVR-1803 Operating Instructions Manual Manual pdf 23 page image

ENGLISH23Setting the delay time• Input the distance between the listening position and the different speakers to set the delay time for the surround mode.Preparations:Measure the distances between the listening position and the speakers (L1 to L4 on the diagram atthe right).L1: Distance between center speaker and listening positionL2: Distance between front speakers/subwoofer and listening positionL3: Distance between surround speakers and listening positionL4: Distance between surround back speaker and listening positionCAUTION:Set the center speaker at the same distance from the front speakers (left and right) or thesubwoofer, or so that the difference in distance (L2 – L1) is 5 feet or less.Set the surround speakers (left and right) at the same distance from the front speakers (left and right)or the subwoofer, or so that the difference in distance (L2 – L3) is 15 feet or less.Set the surround back speaker at the same distance from the front speakers or the subwoofer, orso that the difference in distance (L2 – L4) is 15 feet or less.L1 L2L2L3 L4Center FRFLSubwooferSLListening positionSRSB1 Use the (left) and (right) buttons to set the distance from the front speakers and subwoofer to thelistening position.8 FRNT/SW 12ft• The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closestto the measured distance.(“/SW” appears only when subwoofer = yes.)Press the ENTER or (down) button to switch to the center speaker setting.NOTE:• The speaker distance can be adjusted between 0 and 60 feet in steps of 1 foot.2 Use the (left) and (right) buttons to set the distance from the center speaker to the listening position.9 CENTER 12ft• The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closestto the measured distance.Press the ENTER or (down) button to switch to the surround speakers setting.NOTE:• No setting when “None” has been selected for the center speaker.3 Use the (left) and (right) buttons to set the distance from the surround speakers to the listeningposition.10 SURR. 10ft• The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closestto the measured distance.Press the ENTER or (down) button to switch to the surround back speaker setting.NOTE:• No setting when “None” has been selected for the surround speakers.