Denon AVR-1912 Owner's Manual

Also see for AVR-1912: User manual Specifications Getting started Service manual User manual

Contents

91System SetupZONE2 Setup Default settings are underlined.Set the audio to play back with multi-zone (ZONE2).“ZONE2 Setup” is displayed when “ZONE2” is selected with “Amp Assign”.Setting items Setting detailsLch LevelAdjust the left channeloutput level.–12dB – +12dB (0dB)Rch LevelAdjust the right channeloutput level.–12dB – +12dB (0dB)Volume LimitMake a setting formaximum volume.OFF : Do not set a maximum volume.–20dB (61) / –10dB (71) / 0dB (81)This is displayed from 0 to 99 when “Volume Display” (vpage 92)is set to “Absolute”.Power On LevelDefine the volume settingthat is active when thepower is turned on.Last : Use the memorized setting from the last session.– – – (0) : Always mute when power is turned on.–80dB – 18dB (1 – 99) : The volume is adjusted to the set level.This is displayed from 0 to 99 when “Volume Display” (vpage 92)is set to “Absolute”.Mute LevelSet the amount ofattenuation when mutingis on.Full : The sound is muted entirely.–40dB : The sound is attenuated by 40 dB down.–20dB : The sound is attenuated by 20 dB down.Setting items Setting detailsOther(Continued)Notification : Sets the display of a notification message when the latestfirmware is released.Update : Displays a notification message on this unit’s menu screen whenthe latest firmware is released with “Firmware Update”. The notificationmessage is displayed for about 20 seconds when the power is turned on.Connect to broadband Internet (vpage 12) when using this function.• ON : Display update message.• OFF : Do not display update message.• When you press ENTER during display of thenotification message, the “Check for Update”screen is displayed (Refer to page 93 for moreinformation on “Firmware Update”).• Press RETURN B to erase the notificationmessage.Upgrade : Display a notification message on this unit’s menu screenwhen downloadable firmware is released with “Add New Feature”. Thenotification message is displayed for about 20 seconds when the poweris turned on. Connect to broadband Internet (vpage 12) when usingthis function.• ON : Display upgrade message.• OFF : Do not display upgrade message.• When you press ENTER during display of the notification message, the“Add New Feature” screen is displayed (Refer to page 93 for moreinformation on “Add New Feature”).• Press RETURN B to erase the notification message.Rhapsody AccountSet or change Usernameand Password(vpage 40 “Listening toRhapsody”).Username / Password / Clear• For character input, see page 73.Napster AccountSet or change Usernameand Password(vpage 35 “Listening toNapster”).Username / Password / Clear• For character input, see page 73.Network Info.Display network information.Friendly Name / DHCP=ON or OFF / IP Address / MAC Address