[1] Outputting a program source to an amplifier, etc., in a different room (ZONE2 mode)13 Start playing the source to be output.• For operating instructions, refer to the manuals of therespective components.12, 4 2VCR -1 -2 V.AUX CDR / TAPEPHONO CD TUNER DVD / VDP TV / DBS2ZONE2ZONE2 SOURCEDisplayNOTES:• The signals of the source selected in the ZONE2 mode are alsooutput from the VCR-1, VCR-2 and CDR/TAPE recording outputterminals.• Digital signals are not output to the ZONE2 output jacks.Press the ZONE2/REC SELECT button.The display switches as follows eachtime the button is pressed. ZONE 2 /REC SELECT(Main unit)2 With “ZONE2 SOURCE” displayed, turnthe FUNCTION knob and select the sourceyou wish to record.FUNCTION(Main unit)4 To cancel, turn the function knob andselect “SOURCE”.FUNCTION(Main unit)Multi-source playback[2] Remote control unit operations during multi-source playback (selecting the source)1 Set the slide switch to “AUDIO” and “ZONE2”.512341(Remote control unit)2 Press the ZONE2 “ON” button.To cancel the ZONE2 mode.Press the ZONE2 “OFF” button.(Remote control unit)3 Press the input source button.• The ZONE2 source switches directly.4 The output level of the ZONE 2 SPEAKEROUT terminals can be controlled using theVOLUME + and – buttons on the remotecontrol unit.(Remote control unit)DEFAULT SETTING (ZONE2 VOLUME LEVEL) :- - - dB (MINIMUM)5 When the ZONE2 SOURCE function is setto TUNER, the preset channel can beselected using the CHANNEL + and –buttons on the remote control unit.(This is only possible when the main unitin the ZONE2 mode.)(Remote control unit)The main zone output can beturned on and off with the MAINON/OFF button.2SURROUNDBACK ZONE 2OUTPUT(Light)47ENGLISH