Denon AVR-2105 Operating Instructions Manual

Also see for AVR-2105: Specifications Operating instructions Service manual Operating instructions Operating instructions

13 DSP SURROUND SIMULATION• This unit is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing to synthetically recreate thesound field. One of 7 preset surround modes can be selected according to the program source and the parameters can be adjusted accordingto the conditions in the listening room to achieve a more realistic, powerful sound.Surround modes and their features1234567 VIRTUALROCK ARENAJAZZ CLUBVIDEO GAMEMONO MOVIE(NOTE 1)MATRIX5CH/7CHSTEREOSelect this mode to enjoy a virtual sound field, produced from the front 2-channel speakers or headphones.Use this mode to achieve the feeling of a live concert in an arena with reflected sounds coming from all directions.This mode creates the sound field of a live house with a low ceiling and hard walls. This mode gives jazz a veryvivid realism.Use this to enjoy video game sources.Select this when watching monaural movies for a greater sense of expansion.Select this to emphasize the sense of expansion for music sources recorded in stereo. Signals consisting of thedifference component of the input signals (the component that provides the sense of expansion) processed fordelay are output from the surround channel.The front left channel signals are output to the surround and surround back signal left channels, the front rightchannel signals are output to the surround and surround back signal right channels, and the in-phase componentof the left and right channels is output to the center channel. Use this mode to enjoy stereo sound.Depending on the program source being played, the effect may not be very noticeable.In this case, try other surround modes, without worrying about their names, to create a sound field suited to your tastes.NOTE 1: When playing sources recorded in monaural, the sound will be one-sided if signals are only input to one channel (left or right), so inputsignals to both channels. If you have a source component with only one audio output (monophonic camcorder, etc.) obtain a “Y” adaptercable to split the mono output to two outputs, and connect to the L and R inputs.Personal Memory PlusThis set is equipped with a personal memorize function that automatically memorizes the surround modes and input modes selected forthe input different sources. When the input source is switched, the modes set for that source last time it was used are automaticallyrecalled.The surround parameters, tone control settings and playback level balance for the different output channels are memorized for eachsurround mode.57ENGLISH