17ENGLISH Advanced versionSimple version InformationBasic versionConnecting a digital video recorder• You can record video onto a Blu-ray Disc or DVD.• Select the connector to use and connect the device.• When recording analog audio, use the analog connection.• See “REC OUT mode” (vpage 40) for operating instructions.• For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage 14).Cables used for connectionsVideo cable (sold separately)Video cable (Yellow)S-Video cableAudio cable (sold separately)Audio cable (White)(Red) RLRLOptical cableRLRLRLRLRL RLOUT INAUDIOAUDIO VIDEOVIDEOOUT INOPTICALOPTICALINAUDIOAUDIOOUTVIDEOOUTS-VIDEO VIDEODigital video recorderSet this to change the digital input connector or component video input connector to which the inputsource is assigned.“Input Assign” (vpage 48)in Set as NecessaryNOTETo record video signals through this unit, use the same type of video cable for connection between thisunit and the player as used for connection between this unit and the recorder.Connecting a digital camcorder• You can enjoy video and audio from a digital comcorder.• You can enjoy games by connecting a game machine via the V.AUX input connector. In this case, selectthe input source to “V.AUX”.• For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage 14).Cables used for connectionsVideo cable (sold separately)Video cable (Yellow)Audio cable (sold separately)Audio cable (White)(Red) RLRLRLRLOUTAUDIOVIDEOVIDEO AUDIORLOUTDigital camcorderSet this to change the digital input connector or component video input connector to which the inputsource is assigned.“Input Assign” (vpage 48)in Set as NecessaryNOTEWhen a non-standard video signal from a game machine or some other source is input, the video conversionfunction might not operate. In this case, use the monitor output of the same connector as the input.