Denon AVR-2311CI Owner's Manual

Also see for AVR-2311: Service manual Service manual Owner's manual

41ENGLISH Basic versionSimple version InformationAdvanced versionPlayback in ZONE2 (Separate room)• You can operate this unit so as to enjoy audio in a room (ZONE2)other than the MAIN ZONE (room where the unit is located).• You can simultaneously play back the same source in both the MAINZONE and ZONE2. You can also play back separate sources in theMAIN ZONE and ZONE2.• There are two methods to do this, as described below. Choose oneof the methods.q ZONE2 playback by speaker outputw ZONE2 playback by audio output (PRE OUT)(using an external amplifier)q ZONE2 playback by speakeroutputThe ZONE2 audio signals are output from this unit’s SURR.BACK/AMPASSIGN speaker terminals using the amplifier assignment function.Connecting and setting the speakers“Amp Assign” setting(vpage 57) and audiosignals outputConnecting the speakersZONE2Output signal :Stereo (L / R)MAIN ZONEZONE2This unitw ZONE2 playback by audio outputThe audio signals connected to this unit’s ZONE2 output terminals(ZONE2 OUT) are output to the ZONE2’s amplifier and played withthat amplifier.Connection (ZONE2)RLR LAUXINThis unitMAIN ZONEZONE2• We recommend using high quality pin-plug cables for audioconnections in order to prevent noise.• Also be sure to read the operating instructions of the connecteddevices.NOTEIt is not possible to play the digital audio signals input from theHDMI, COAXIAL or OPTICAL terminals in ZONE2. Play using analogconnections (in stereo).Convenient functionsVarious memory functionsn Personal memory plus functionThis function sets the settings (input mode, surround mode, HDMIoutput mode, MultEQ, Dynamic EQ, Dynamic Volume, audio delayetc.) last selected for the individual input sources.The surround parameters, tone settings and the volumes of thedifferent speakers are stored for the individual surround modes.n Last function memoryThis function stores the settings which were made before goinginto the standby mode.When the power is turned back on, the settings are restored.