Denon AVR-2311CI Owner's Manual

Also see for AVR-2311: Service manual Service manual Owner's manual

55ENGLISH Basic versionSimple version InformationAdvanced versionAudio/Video AdjustRemote control operationbuttonsMove the cursor(Up/Down/Left/Right) Confirm the setting Return to previous menuSetting items Setting detailsDynamic Volume®Solve the problem of largevariations in volume levelbetween TV, movies andother content (betweenquiet passages andloud passages, etc.) byautomatically adjusting tothe user’s preferred volumesetting.Midnight : Most adjustment to softest and loudest sounds.Evening : Medium adjustment to loudest and softest sound.Day : Least adjustment to loudest and softest sounds.OFF : Do not use the “Dynamic Volume”.• is displayed when set to “ON”.• If “Dynamic Volume” is set to “Yes” in Auto Setup (vpage 9), thesetting is automatically changed to “Evening”.• Buttons on the remote control unit or main unitcan be used for operations.GOperations with the remote control unitHPress DYN EQ/VOL.Each time DYN EQ/VOL is pressed, the setting ischanged as shown below.Dynamic EQ : ONDynamic Volume : MidnightDynamic EQ : ONDynamic Volume : EveningDynamic EQ : ONDynamic Volume : OFFDynamic EQ : OFFDynamic Volume : OFFDynamic EQ : ONDynamic Volume : DayGOperations with the main unitHPress DYNAMIC VOLUME.Each time DYNAMIC VOLUME ispressed, the setting is changed asshown below.Dynamic Volume : MidnightDynamic Volume : EveningDynamic Volume : OFFDynamic Volume : Dayn Manual EQ Default settings are underlined.Use the graphic equalizer to adjust the tone of each speaker.“Manual EQ” can be set when “MultEQ®” setting (vpage 54) is “Manual”.Setting items Setting detailsAdjust CHCorrect the tone of eachspeaker.q Select the speaker tone adjustment method.All : Adjust the tone of all speakers together.L/R : Adjust the tone of left and right speakers together.Each : Adjust the tone of each speaker.w Select the speaker.e Select the adjustment frequency band.63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz• Select the speakers you want to adjust when “L/R” or “Each” isselected.r Adjust the level.–20.0dB – +6.0dB (0.0dB)Base Curve CopyCopy “Audyssey Flat” curvefrom MultEQ.Yes : Copy.No : Do not copy.“Base Curve Copy” is displayed after Audyssey Auto Setup has beenperformed.DefaultThe “Manual EQ” settingsare returned to the defaultsettings.Yes : Reset to the defaults.No : Do not reset to the defaults.