Denon AVR-3805 Operating Instructions Manual

Also see for AVR-3805: Control protocol Service manual Service manual Operating instructions Operating instructions

Contents

7ENGLISHConnecting the antenna terminalsDIRECTION OFBROADCASTINGSTATION75 Ω/ohmsCOAXIALCABLEFM ANTENNAFM INDOORANTENNA(Supplied)AM LOOPANTENNA(Supplied)AM OUTDOORANTENNAGROUND• An F-type FM antenna cable plug can be connecteddirectly.142 3AM loop antenna assemblyConnect to the AMantenna terminals.Remove the vinyl tieand take out theconnection line.Bend in the reversedirection.a. With theantenna ontop anystablesurface.b. With theantennaattached toa wall.MountInstallation hole Mount on wall, etc.Connection of AM antennas1. Push thelever. 2. Insert theconductor. 3. Return thelever.Notes:• Do not connect two FM antennas simultaneously.• Even if an external AM antenna is used, do not disconnect the AM loop antenna.• Make sure AM loop antenna lead terminals do not touch metal parts of the panel.LRLRR LConnecting the external input (EXT. IN) jacks• These jacks are for inputting multi-channel audio signals from an outboard decoder, or a component with adifferent type of multi-channel decoder, such as a DVD Audio player, a multi-channel SACD player, or otherfuture multi-channel sound format decoder.• When making connections, also refer to the operating instructions of the other components.Decoder with 8- or 6-channelanalog outputFrontSurround backSurroundSubwooferCenterFor instructions on playback using the external input (EXT. IN) jacks. (See page 36)LR++OUTPUT INPUT AUX OUTConnecting the MULTI ZONE jacksFor instructions on operations using the MULTI ZONE FUNCTIONS. (See pages 40, 41)[1] ZONE2 preout CONNECTIONS• If another power amplifier or pre-main (integrated) amplifier or is connected, the ZONE2 preout (variable/fixedlevel) jacks can be used to play a different program source in ZONE2 the same time. (See page 41)• The ZONE2 video out is only for the ZONE2.ZONE2Power amplifierExtension jacks for future use.INFRARED SENSORINFRAREDRETRANSMITTERCONTROL terminalPerform the following operation before using an external controller connected to the RS--232C terminal:1. Press the ON/STANDBY button on the main unit and set the unit to the operating mode.2. Perform the operation to turn off the power from the external control.3. Check that the product has been set to the standby mode.After checking the above, check the connections of the external controller. Operation ispossible.++OUTPUT INPUT AUX OUTR LB[2] ZONE3 FIXEDOUT CONNECTIONS• If another pre-main (integrated) amplifier is connected, the ZONE3 Fixed-OUT jacks can be used to play adifferent program source in ZONE3 the same time. (See page 41)ZONE3Pre-main amplifierExtension jacks for future use.INFRARED SENSORINFRAREDRETRANSMITTER