Denon AVR-485S Operating Instructions Manual

Also see for DHT-485DV: Operating instructions Datasheet Quick connect guide

14142 3Connecting the antenna terminalsDIRECTION OFBROADCASTINGSTATIONAM LOOPANTENNA(An Accessory)FM ANTENNAGROUNDAM OUTDOORANTENNAFM INDOORANTENNA(An Accessory)75 Ω/ohmsCOAXIALCABLEAM loop antenna assemblyConnect to the AMantenna terminals.Bend in the reversedirection.Remove the vinyl tieand take out theconnection line.a. With the antennaon top any stablesurface.b. With the antennaattached to awall.MountInstallation hole Mount on wall, etc.Connection of AM antennas1. Push the lever. 2. Insert theconductor.3. Return the lever.Note to CATV system installer:This reminder is provided to call the CATV system installer’sattention to Article 820-40 of the NEC which provides guidelinesfor proper grounding and, in particular, specifies that the cableground shall be connected to the grounding system of thebuilding, as close to the point of cable entry as practical.NOTES:• Do not connect two FM antennas simultaneously.• Even if an external AM antenna is used, do not disconnect theAM loop antenna.• Make sure AM loop antenna lead terminals do not touch metalparts of the panel.ENGLISH