Denon AVR-485S Operating Instructions Manual

Also see for DHT-485DV: Operating instructions Datasheet Quick connect guide

40Dolby Pro Logic IIx (Pro Logic II) mode2 Select the STANDARD (Dolby Pro Logic IIx) mode.Light(Main unit) (Remote control unit)3 Play a program source with the mark.• For operating instructions, refer to the manuals of therespective components.5, 74, 61 24, 65, 7185, 724 Select the surround parameter mode.1 Select the function to which the component you want to playis connected.Example: DVD(Main unit) (Remote control unit)Display(Main unit) (Remote control unit)To perform this operation from the remote control unit,check that the mode selector switch is set to “AUDIO”.Display5 Select the optimum mode for the source.(Main unit)(Remote control unit)• The Dolby Pro Logic indicator lights.The Dolby Surround Pro LogicIIx Cinema or Music mode canbe chosen directly by pressingthe CINEMA or MUSIC buttonon the remote control unitduring playback in the DolbySurround Pro Logic IIx mode.To play in the PL IIx mode, set “S. BACK” at the Speaker Configuration setting to “SMALL” or “LARGE”.• When the “SURROUND BACK” parameter is set to “ON”. (Set “S. BACK” at system set up to “SMALL”or “LARGE”.)(Pro Logic IIxCinema mode)(Pro Logic IIxMusic mode)(Pro Logic IIxGame mode)or or• When the “SURROUND BACK” parameter is set to “OFF”. (Set “S. BACK” at system set up to“NONE”.)(Pro Logic IICinema mode)(Pro Logic IIMusic mode)(Pro Logic IIGame mode)or or(Dolby Pro Logicmode)ENGLISH