Denon AVR-485S Operating Instructions Manual

Also see for DHT-485DV: Operating instructions Datasheet Quick connect guide

213 Use the (left) and (right) buttons to set the distance from the center speaker to the listening position.8 CENTER 12ft• The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closestto the measured distance.Press the ENTER or (down) button to switch to the surround L speakers setting.Setting the delay time• Input the distance between the listening position and the different speakers to set the delay time for the surround mode.Preparations:Measure the distances between the listening position and the speakers (L1 to L5) on the diagram atthe right).L1: Distance between center speaker and listening positionL2: Distance between front speakers and listening positionL3: Distance between surround speakers and listening positionL4: Distance between surround back speaker and listening positionL5: Distance between subwoofer and listening positionCAUTION:Please note that the difference for every speaker should be 15 ft or less.NOTE:• No setting when “None” has been selected for the Speaker Configuration setting.L 1 L 2L 5L 3 L 4Center FRFLSubwooferSLListening positionSRSB1 Use the (left) and (right) buttons to set the distance from the front L speaker to the listening position.6 FRONT L 12ft• The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closestto the measured distance.Press the ENTER or (down) button to switch to the front R speaker setting.2 Use the (left) and (right) buttons to set the distance from the front R speaker to the listening position.7 FRONT R 12ft• The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closestto the measured distance.Press the ENTER or (down) button to switch to the center speaker setting.ENGLISH