Denon AVR-485S Operating Instructions Manual

Also see for DHT-485DV: Operating instructions Datasheet Quick connect guide

43Surround parameters qPro Logic IIx and Pro Logic II Mode:• The Cinema mode is for use with stereo television shows andall programs encoded in Dolby Surround.• The Music mode is recommended as the standard mode forauto sound music systems (no video), and is optional for A/Vsystems.• The Pro Logic mode offers the same robust surroundprocessing as original Pro Logic in case the source contents isnot of optimum quality.• The Game mode for playing games.The game mode can only beused with 2-channel audio sources.Select one of the modes (“Cinema”, “Music”, “Pro Logic”or“Game”).Panorama Control:This mode extends the front stereo image to include thesurround speakers for an exciting “wraparound” effect withside wall imaging.Select “OFF” or “ON”.Dimension Control:This control gradually adjust the soundfield either towards thefront or towards the rear.The control can be set in 7 steps from 0 to 6.Center Width Control:This control adjust the center image so it may be heard onlyfrom the center speaker; only from the left/right speakers as aphantom image; or from all three front speakers to varyingdegrees.The control can be set in 8 steps from 0 to 7.DTS NEO:6 Mode:• CinemaThis mode is optimum for playing movies. Decoding isperformed with emphasis on separation performance toachieve the same atmosphere with 2-channel sources as with6.1-channel sources.This mode is effective for playing sources recorded inconventional surround formats as well, because the in-phasecomponent is assigned mainly to the center channel (C) and thereversed phase component to the surround (SL, SR and SBchannels).• MusicThis mode is suited mainly for playing music. The front channel(FL and FR) signals bypass the decoder and are played directlyso there is no loss of sound quality, and the effect of thesurround signals output from the center (C) and surround (SL,SR and SB) channels add a natural sense of expansion to thesound field.CENTER IMAGE (0.0 to 1.0: default 0.3):The center image parameter for adjusting the expansion of thecenter channel in the DTS NEO:6 MUSIC mode has been added.7 Set the various surround parameters.• CINEMA EQ settingON OFFor orCINEMA EQ OFF• CENTER IMAGE setting0.0C.IMAGE 0.30.3 1.0or or• DEFAULT settingYES Y/N NOor orDEFAULT Y/NSelect “Yes” to reset to the factory defaults.8 Press the ENTER button to finish surround parameter mode.(Remote control unit)• TONE DEFEAT settingON OFFor orTONE DEF. ON• SURROUND BACK SPEAKER settingON OFFor orSB : ONNOTE:• When making parameter settings, the display will return to theregular condition several seconds after the last button waspressed and the setting will be completed.ENGLISH• D. COMP. settingOFF LOW MID HIGHororD.COMP. OFF• LFE setting-10dB -5dB 0dBororLFE 0dBNOTE:This parameter is displayed during DOLBY DIGITAL playback.NOTE:This parameter is displayed during DOLBY DIGITAL playback.