Denon AVR-5800 Operating Instructions Manual

Also see for AVR-5800: Setup guide Brochure & specs Upgrade operating instruction Operating instructions

Denon AVR-5800 Operating Instructions Manual Manual pdf 10 page image

10142 3Connecting the antenna terminalsDIRECTION OFBROADCASTINGSTATION AM LOOP ANTENNA(Supplied)FM ANTENNAGROUNDAM OUTDOORANTENNA300 Ω/ohmsTERMINALSFM ANTENNAADAPTER(Supplied)FM INDOORANTENNA(Supplied)300 Ω/ohmsFEEDERCABLE75 Ω/ohmsCOAXIALCABLEF-type converter plug (attached)• When using the FM antennaattach to this apparatus• An F-type FM antenna cable plug can be connected directly.• If the FM antenna cable’s plug is not of the F-type, connect using theincluded antenna adapter.AM loop antenna assemblyConnect to the AMantenna terminals.Bend in the reversedirection.Remove the vinyl tieand take out theconnection line.a. With the antennaon top any stablesurface.b. With the antennaattached to awall.MountInstallation holeMount on wall, etc.Open the coverANTENNA ADAPTERREMOVECLAMP 75 Ω/ohms COAXIAL CABLECLAMP CLAMPPULLPULLSHUTConnection of AM antennas1. Loosen by turningcounterclockwise. 2. Insert thecord. 3. Tighten by turningclockwise.Note to CATV system installer:This reminder is provided to call the CATV system installer’sattention to Article 820-40 of the NEC which providesguidelines for proper grounding and, in particular, specifiesthat the cable ground shall be connected to the groundingsystem of the building, as close to the point of cable entry aspractical.Notes:• Do not connect two FM antennas simultaneously.• Even if an external AM antenna is used, do not disconnectthe AM loop antenna.• Make sure AM loop antenna lead terminals do not touchmetal parts of the panel.FM antenna adapter assembly