Denon AVR-5800 Operating Instructions Manual

Also see for AVR-5800: Setup guide Brochure & specs Upgrade operating instruction Operating instructions

Denon AVR-5800 Operating Instructions Manual Manual pdf 52 page image

5212 LISTENING TO THE RADIOAuto tuning1 Set the input function to “TUNER”.INPUT SELECTOR(Main unit) (Remote control unit)2 Watching the display, press the BAND button to select thedesired band (AM or FM).3 Press the MODE button to set the auto tuning mode.“Auto” appears on the display.4 Press the TUNING UP or DOWN button.Automatic searching begins,then stops when a station istuned in.If tuning does not stop at the desired station, use to the “Manualtuning” operation.1 4324Manual tuning1 Set the input function to “TUNER”.INPUT SELECTOR(Main unit) (Remote control unit)2 Switch the remote control device to “TUNER”.Watching the display, press the BAND button to select thedesired band (AM or FM).3 Press the MODE button to set the manual tuning mode.Check that the display’s “AUTO” indicator turns.4 Press the TUNING UP or DOWN button to tune in the desiredstation.The frequency changes continuously when the button is heldin.NOTES:• When in the auto tuning mode on the FM band, the “STEREO” indicator lights on the display when a stereo broadcast is tuned in. At openfrequencies, the noise is muted and the “TUNED” and “STEREO” indicators turn off.• When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the “STEREO” indicator turns off.To operate the tuner by remote control, switch the remote control device to “TUNER”.(Remote control unit)(Remote control unit)(Remote control unit)(Remote control unit)(Remote control unit)(Remote control unit)