Denon AVR-5800 Operating Instructions Manual

Also see for AVR-5800: Setup guide Brochure & specs Upgrade operating instruction Operating instructions

Denon AVR-5800 Operating Instructions Manual Manual pdf 16 page image

167 SETTING UP THE SYSTEM• Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 6 to 13), make thevarious settings described below on the monitor screen using the AVR-5800’s on-screen display function.These settings are required to set up the listening room’s AV system centered around the AVR-5800.• Use the following buttons to set up the system:• System setup items and default values (set upon shipment from the factory)System setup Default settingsqwtyuioSpeakerConfiguration(SurroundSpeakerSetting)Subwoofer modeSB CH AutoFlag DetectChannelLevelSubwooferPeak LimitLevDigital InAssignmentOn ScreenDisplayAuto TunerPresetsInput the combination of speakers in your system and theircorresponding sizes (SMALL for regular speakers, LARGE for full-size, full-range) to automatically set the composition of the signalsoutput from the speakers and the frequency response.Use this function when using multiple surround speakercombinations for more ideal surround sound. Once thecombinations of surround speakers to be used for thedifferent surround modes are preset, the surroundspeakers are selected automatically according to thesurround mode.This selects the subwoofer speaker for playing deep bass signals.Set the method of playing the surround back channel for digitalsignals.This adjusts the volume of the signals output from the speakers andsubwoofer for the different channels in order to obtain optimumeffects.This parameter is for detecting the maximum level of the low basssignals output from the subwoofer channel in order to protect thesubwoofer from damage and prevent unpleasant distorted soundsfrom being produced.This assigns the digital input jacks for the different inputsources.This sets whether or not to display the on-screen display thatappears on the monitor screen when the controls on the remotecontrol unit or main unit are operated (from MONITOR 1 outputsonly).FM stations are received automatically and stored in the memory.SurroundmodeSurroundspeakerInputsourceDigitalInputsFront Sp.SmallCenter Sp. Surround Sp. Sub WooferSmall Small YesDOLBY/DTSSURROUNDTHXSURROUNDWIDESCREEN5CH/7CHSTEREODSPSIMULATION EXT. IN-1 EXT. IN-2 —A A A A A A A —LFE —THX—Front L & R Center Surround L & R Sub Woofer12 ft (3.6 m) 12 ft (3.6 m) 10 ft (3.0 m) 12 ft (3.6 m)Front L Front R Center SurroundRSurroundBack R Subwoofer0 dB 0 dB 0 dB 0 dB 0 dB 0 dBPeak Limitter = OFFCD DVD VDP TV DBS/SAT VCR-1 VCR-2 TAPE-2COAXIAL1COAXIAL2COAXIAL3OPTICAL1OPTICAL2OPTICAL3OPTICAL4OPTICAL6On Screen Display = ONA1 ~ A8B1 ~B8C1 ~C8D1 ~D8E1 ~E887.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz520/600/1000/1400/1500/1710 kHz/90.1/90.1 MHz90.1 MHz90.1 MHz90.1 MHzSurround Back Sp.Small / 2spkrsAuto Flag Detect Mode = OFFe Delay TimeThis parameter is for optimizing the timing with which the audiosignals are produced from the speakers and subwoofer according tothe listening position.SBL & SBR10 ft (3.0 m)r Multi ZoneControlThis sets the output level for the multi-zone 1output jacks. VariableSurroundBack L0 dBSurroundL0 dBMulti Zone-1vol. LevelPower AMPAssignmentSet this to switch the surround back channel’spower amplifier for use for multi-zone 2. Surround BackTAPE-1OPTICAL5Screen while icons are displayedTransmission codesof independent buttonsCHANNEL• : Tuner presetCHANNELª : Tuner presetVOL• : Main volume of AV amplifierVOLª : Main volume of AV amplifierMUTE : Muting of AV amplifierVCR-3OFFV. AUXOFF