86Surr.Parameter Default settings are underlined.You can adjust the surround audio sound field effects to match your preferences.The items (parameters) that can be adjusted depend on the signal being input and the currently setsound mode. For details on the adjustable parameters, see “Sound modes and surround parameters”(vpage 118).NOTESome setting items cannot be set while playback is stopped. Make the settings during playback.Setting items Setting detailsCinema EQGently softens the uppertreble range of moviesoundtracks to reducepossible harshness andimprove clarity.On : “Cinema EQ” is used.Off : “Cinema EQ” is not used.Loudness MngmtThis can be set in theDolby TrueHD mode. Thissets whether to outputas specified in “DynamicComp.” or output directlywithout compressing thedynamic range of audiorecorded in the disc.On : Outputs using the settings made in “Dynamic Comp.” and “DialogueNormalization” (vpage 108) are enabled.Off : “Dynamic Comp.” settings and “Dialogue Normalization” aredisabled, and the signals on the disk are output as is.Dynamic Comp.Compress dynamic range(difference between loudand soft sounds).Auto : Automatic dynamic range compression on/off control according tosource.Low / Medium / High : These set the compression level.Off : Dynamic range compression is always off.You can set “Auto” only for the Dolby TrueHD source.Dialog Level Default settings are underlined.Adjusts and enhances the frequency band corresponding to the human voice at the center channel tomake the voice clearer.Setting items Setting detailsLevel –12dB – +12dB (0dB)Subwoofer Level Default settings are underlined.This setting adjusts the volume level for the subwoofer.Setting items Setting detailsSubwooferTurn subwoofer output onand off.On : The subwoofer is used.Off : The subwoofer is not used.NOTEThis can be set when the sound mode is “DIRECT” (vpage 69) andthe “Subwoofer Mode” (vpage 101) is “LFE+Main”.Subwoofer LevelThis setting adjusts thevolume level for thesubwoofer.–12dB – +12dB (0dB)Audio