92VideoHDMI Setup Default settings are underlined.Make settings for HDMI video/audio output.Setting items Setting detailsAuto Lip SyncMake automaticcompensation for timingshift in audio and videooutput.On : Compensated.Off : Not compensated.HDMI Audio OutSelect HDMI audio outputdevice.AVR : Play back through speakers connected to the unit.TV : Play back through TV connected to the unit.• When the HDMI control function is activated, priority is given to the TVaudio setting (vpage 78 “HDMI control function”).• When the power of this unit is on and “HDMI Audio Out” is set to “TV”,audio is output as 2-channel from the HDMI OUT connector.HDMI Pass ThroughSelects how the AV receiverwill pass HDMI signals tothe HDMI output in standbypower mode.On : Passes the selected HDMI input through the AV receiver’s HDMIoutput when the AV receiver is in standby power mode.Off : No HDMI signals are passed through the AV receiver’s HDMI outputin standby power mode.NOTEWhen “HDMI Pass Through” is set to “On”, it consumes morestandby power. If you are not using this unit for an extended period, itis recommended that you unplug the power cord from the power outlet.Setting items Setting detailsHDMI ControlYou can link operations withdevices connected to HDMIand compatible with HDMIControl.On : Use HDMI control function.Off : Do not use HDMI control function.• When a device that is not compatible with the HDMI control function isconnected, set “HDMI Control” to “Off”.• Please consult the operating instructions for each connected device tocheck the settings.• Refer to “HDMI control function” (vpage 78) for more informationabout the HDMI control function.NOTE• When “HDMI Control” is set to “On”, it consumes more standbypower. If you are not using this unit for an extended period, it isrecommended that you unplug the power cord from the power outlet.• The HDMI control function controls operations of a TV that is compatiblewith the HDMI control function. Make sure that the TV and HDMI areconnected when you perform HDMI control.• If the “HDMI Control” settings have been changed, always reset thepower to connected devices after the change.Pass Through SourceThe AV receiver will “passthrough” the sources HDMIsignal when in standby.Last : Choose this option to “pass through” the last used HDMI inputvideo source.CBL/SAT / DVD / Blu-ray / GAME / AUX / MEDIA PLAYER : Choose oneof these HDMI sources to be passed through when the AV receiver is instandby.“Pass Through Source” can be set when “HDMI Control” is set to“On” or “HDMI Pass Through” is set to “On”.Power Off ControlLinks the power standby ofthis unit to external devices.All : If power to a connected TV is turned off independently of the inputsource, power to this unit is automatically set to standby.Video : When the TV is turned off with one of “HDMI” or “VIDEO”(vpage 95, 96) assigned for the CBL/SAT / DVD / Blu-ray / GAME /AUX / MEDIA PLAYER / TV AUDIO input source on this unit, power to thisunit is automatically set to standby.Off : This unit does not link with power to a TV.“Power Off Control” can be set when “HDMI Control” is set to “On”.