o Dynamic Comp.Compress dynamic range (difference between loud and soft sounds).Auto: Automatic dynamic range compressionon/off control according to source.Low / Medium / High: These set the compression level.Off: Dynamic range compression is always off.0 “Auto” can only be set when Dolby TrueHD signals are input.0 The default setting is “Off”. When the input signal is Dolby TrueHD source, thedefault setting is “Auto”.o Low FrequencyAdjust the low frequency effects level (LFE).-10 dB – 0 dB (Default : 0 dB)For proper playback of the different sources, we recommend setting to thevalues below.0 Dolby Digital sources : 0 dB0 DTS movie sources : 0 dB0 DTS music sources: ]10 dBo Center ImageDistributes the dialogue output from the center channel to the front leftand right channels and widens the sound image in the front.0.0 – 1.0 (Default : 0.3)0 You can set this when the sound mode is DTS Neo:6 in the “Music” mode.0 The smaller the value, the more dialogue is concentrated on the centerchannel. The larger the value, the more dialogue is distributed to front left andright channels, and the more the sound image widens in the front.o PanoramaThe front sound field is expanded further towards the back to create aseamlessly inclusive sound impression.On: Use “Panorama”.Off(Default): Do not use “Panorama”.You can set this when the sound mode is Dolby PLg/gx in the “Music” mode.Contents Connections Playback Settings Tips Appendix139Front panel Display Rear panel Remote Index