Listening to FM/AM broadcasts1 Connect the antenna. (“Connecting an FM/AMantenna” (v p. 46))2 Press TUNER to switch the input source to “Tuner”.G TV screen H .TUNE+/-TUNE+/- OPTIONOPTIONAUTOAUTOCHCH+/-+/-Tuner CH 1FM 92.10MHzTune Preset Option .01 FM 92.10MHzG Display of this unit H3 Press OPTION.The option menu screen is displayed.4 Use ui to select “FM/AM”, then press ENTER.This displays the reception band input screen.5 Use o p to select “FM” or “AM”, then press ENTER.FM: When listening to an FM broadcast.AM: When listening to an AM broadcast.6 Press TUNE + or TUNE - to select the station you wantlisten to.Scanning is performed until it finds an available radio station. Whenit finds a radio station, it stops the scan automatically and tunes in.0 The modes for receiving FM broadcasts consists of “Auto” mode that automaticallysearches available broadcast stations and “Manual” mode that lets you tune inusing buttons to change the frequency. The default setting is “Auto”. You can alsouse “Direct Tune” to tune in by entering the frequency directly.In “Auto” mode, you cannot tune in to radio stations if the reception is not good.If this is the case, then use the “Manual” mode or “Direct Tune” mode to tune in.0 You can also switch the reception band by pressing BAND on the unit.0 You can also scan the broadcast station by pressing TUNE + or TUNE - on theunit.Operation buttons FunctionTUNE +, – Selects the radio station (up/down)CHANNEL +, - Selects preset radio stationsContents Connections Playback Settings Tips Appendix68Front panel Display Rear panel Remote Index
