o Desired sound does not come outSymptom Cause / Solution PageThe volume does notincrease.0 The maximum volume is set too low. Set the maximum volume using “Limit” on the menu. 1430 Appropriate volume correction processing is performed according to the input audio format and settings,so the volume may not reach the upper limit.－No sound comes out withthe HDMI connection.0 Check the connection of the HDMI connectors. 370 When outputting HDMI audio from the speakers, set “HDMI Audio Out” on the menu to “AVR”. To outputfrom the TV, set “TV”.1480 When using the HDMI control function, check that the audio output is set to the AV amplifier on the TV. 122No sound comes out of aspecific speaker.0 Check that speaker cables are properly connected. 280 Check that a selection other than “None” is set for the “Speaker Config.” setting in menu. 1680 Check the “Assign Mode” setting in the menu. 1670 When the sound mode is “Stereo” and “Virtual”, audio is only output from the front speakers andsubwoofer.－No sound is produced fromsubwoofer.0 Check the subwoofer connections. 290 Turn on the subwoofer’s power. －0 Set “Speaker Config.” – “Subwoofer” on the menu to “Yes”. 1680 When “Speaker Config.” - “Front” in the menu is set to “Large”, depending on the input signal and thesound mode, no sound may be output from the subwoofer.1680 When no subwoofer audio signal (LFE) is included in the input signals, no sound may be output from thesubwoofer.1730 You can make the subwoofer always output sound by setting the “Subwoofer Mode” to “LFE+Main”. 173DTS sound is not output. 0 Check that the digital audio output setting on the connected device is set to “DTS”. －0 Set “Decode Mode” on the menu to “Auto” or “DTS”. 156Dolby TrueHD, DTS-HD,Dolby Digital Plus audio isnot output.0 Make HDMI connections. 420 Check the digital audio output setting on the connected device. On some devices, “PCM” is set bydefault.－Contents Connections Playback Settings Tips Appendix196Front panel Display Rear panel Remote Index
