HDMI control functionA recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate withanother device via the HDMI cable connection.Setting procedure1 Enable the HDMI control function of this unit.Set “HDMI Control” (v p. 156) to “On”.2 Turn the power on for all the devices connected byHDMI cable.3 Set the HDMI control function for all devices connectedby HDMI cable.0 Please consult the operating instructions for the connecteddevices to check the settings.0 Carry out steps 2 and 3 should any of the devices be unplugged.4 Switch the television input to the HDMI input connectedto this unit.5 Switch the input source of this unit to check that videofrom the player connected by HDMI is played backcorrectly.6 When you turn the TV’s power to standby, check thatthe power of this unit also goes to standby.NOTESome functions may not operate depending on the connected TV or player. Checkthe owner’s manual of each device for details beforehand.Contents Connections Playback Settings Tips Appendix124Front panel Display Rear panel Remote Index
