ZONE2 SetupConfigure the settings for audio playback on ZONE2.Values set for “Volume Limit” and “Power On Volume” are displayed according to thesetting specified for the volume “Scale” (v p. 147).o Lch LevelAdjust the left channel output level.-12 dB – +12 dB (Default : 0 dB)o Rch LevelAdjust the right channel output level.-12 dB – +12 dB (Default : 0 dB)o Volume LevelSet the volume output level.Variable(Default): Volume can be adjusted.1 – 98(–79.5 dB – 18.0 dB):Volume is fixed at the desired level. Thevolume cannot be adjusting using the remotecontrol unit.o Volume LimitMake a setting for maximum volume.60 (-20 dB) / 70 (-10 dB) / 80 (0 dB)(Default : 70 (-10 dB))Off: Do not set a maximum volume.This can be set when “Volume Level” is set to “Variable”. (v p. 193)o Power On VolumeDefine the volume setting that is active when the power is turned on.Last(Default):Use the memorized setting from the lastsession.Mute: Always use the muting on condition.1 – 98(–79.5 dB – 18.0 dB): The volume is adjusted to the set level.This can be set when “Volume Level” is set to “Variable”. (v p. 193)Contents Connections Playback Settings Tips Appendix193Front panel Display Rear panel Remote Index
