Wireless LANWhen connecting to a wireless LAN network, stand the rod antenna forwireless LAN/Bluetooth connection upright on the rear panel.See “Wi-Fi Setup” (v p. 186) on how to connect to a wireless LANrouter..SPEAKERS IMPEDANCE : 4㨪16ǡ CLASS 2 WIRINGAM(ASSIGNABLE)HDMIPRE OUTANTENNA211CBL/SAT2DVD3Blu-ray6AUX27CD4GAME5MEDIAPLAYER ARCMONITOR1 MONITOR23Blu-ray4CD2DVD1CBL/SAT1 CBL/SATCBL/SATCOAXIALOPTICAL1CBL/SAT 2DVD(ASSIGNABLE)VIDEO2 DVDCOMPONENT VIDEO1TVAUDIO2CD(ASSIGNABLE)COMPONENT VIDEOSUBWOOFERPR/CRPB/CBYMONITORPR/CRPB/CBYPR/CRPB/CBY(ASSIGNABLE)AUDIOHDMI(ASSIGNABLE)DIGITAL AUDIONETWORKInternetModemTo WAN sideRouter with accesspoint0 When using this unit, we recommend you use a router equipped with the followingfunctions:0 Built-in DHCP serverThis function automatically assigns IP addresses on the LAN.0 Built-in 100BASE-TX switchWhen connecting multiple devices, we recommend a switching hub with aspeed of 100 Mbps or greater.0 Only use a shielded STP or ScTP LAN cable (readily available at electronicsstores). (CAT-5 or greater recommended)0 The normal shielded-type LAN cable is recommended.If a flat-type cable or unshielded-type cable is used, other devices could beaffected by noise.0 When using a router that supports the WPS（Wi-Fi Protected Setup）function, Wi-Fi connection can be carried out easily.0 When using this unit connected to a network with no DHCP function, configure theIP address, etc. in “Network” (v p. 185).NOTE0 The types of routers that can be used depend on the ISP. Contact your ISP or acomputer shop for details.0 This unit is not compatible with PPPoE. A PPPoE compatible router is required ifyour contracted line is not set using PPPoE.0 Do not connect an NETWORK connector directly to the LAN port / Ethernetconnector on your computer.0 Various online services may be discontinued without prior notice.Contents Connections Playback Settings Tips Appendix49Front panel Display Rear panel Remote Index
