o No video is shown on the TVSymptom Cause / Solution PageNo picture appears. 0 Check the connections for all devices. 370 Insert connection cables all the way in. －0 Check that input connectors and output connectors are not reversely connected. －0 Check cables for damage. －0 Match the input settings to the input connector of the TV connected to this unit. 1640 Check that the proper input source is selected. 520 Check the video input connector setting. 1640 Check that the resolution of the player corresponds to that of the TV. 1960 Check whether the TV is compatible with copyright protection (HDCP). If connected to a device notcompatible with HDCP, video will not be output correctly.2240 The HDMI signal cannot be converted to an analog signal. Use analog connections. 2250 Use an “High Speed HDMI cable with Ethernet” or “High speed cable” that comes with the HDMI logo ifyou wish to playback 4K (60/50 Hz) video.－No video is shown on theTV with the DVI-Dconnection.0 With the DVI-D connection, on some device combinations, devices may not function properly due to thecopy guard copyright protection (HDCP).224No video from an inputsource such as a gameconsole is shown on theTV.0 When special video signals are input from a game console, etc., the video conversion function may notfunction. Connect the input connector to the monitor output connector of the same type.－While the menu is beingdisplayed, no video isshown on the TV.0 The video being played will not appear in the background of the menu when the menu is operated duringplayback of the following video signals.- Some images of 3D video contents- Computer resolution images (example: VGA)- Video with an aspect ratio other than 16:9 or 4:3- 4K video－Contents Connections Playback Settings Tips Appendix212Front panel Display Rear panel Remote Index
