Denon DBP-2010 Owner's Manual

14ConnectionsENGLISHConnectionsENGLISHIntroduction Connections Playback Function Setup Others Audio signals output from DIGITAL OUT (COAXIAL)When both HDMI and DIGITAL OUT is connected to other devices, the audio signals currently outputfrom the HDMI OUT will be output from the DIGITAL OUT jack as well, except that HDMI 2ch signalwill be output from HDMI OUT jack, when connected device does not support Dolby Digital and DTS.< When HDMI is not connected or “Audio Mute” is selected···>When HDMI is not connected or the “Audio Mute” is selected in “HDMI Audio Out” setting, the audiosignals output from DIGITAL OUT changes depending on the “Digital Out” setting. Refer to thefollowing table.To set “Digital Out”, press [SETUP], then select “Quick” A “HDMI Audio Out” A “Audio Mute” or“Custom” A “Audio” A “HDMI Audio Out” A “Audio Mute”.• This table applies only when HDMI is not connected or the “Audio Mute” is selected in “HDMI AudioOut” setting.• If “BD Audio Mode” is set to “HD Audio Output” or the BD title does not have secondary orinteractive audio, the audio will be output as shown in the table.• If the “BD Audio Mode” is set to “Mix Audio Output” and the BD title has secondary or interactiveaudio, the audio will be output as follows:*1 Only the independent substream is decoded.*2 Only the Dolby Digital substream is decoded.*3 Only the core substream is decoded.Analogue 7.1ch/5.1ch audio signals can be output from 7.1ch AUDIO OUT jacks.Disc type Audio recording format “Digital Out” settingBitstream LPCMBD-VideoDolby Digital Dolby Digital 2ch Downmix PCMDolby Digital Plus Dolby Digital 2ch Downmix PCM*1Dolby TrueHD Dolby Digital 2ch Downmix PCM*2DTS DTS 2ch Downmix PCMDTS-HD DTS 2ch Downmix PCM*3PCM 2ch Downmix PCM 2ch Downmix PCMDVD-VideoDolby Digital Dolby Digital 2ch Downmix PCMDTS DTS 2ch Downmix PCMPCM 2ch PCM 2ch PCMMPEG MPEG 2ch Downmix PCMDTS-CD DTS 2ch Downmix PCMAVCHD Dolby Digital Dolby Digital 2ch Downmix PCMPCM 2ch Downmix PCM 2ch Downmix PCMDivX® Dolby Digital Dolby Digital 2ch Downmix PCMMP3/ MP2 2ch PCM 2ch PCMaudio CD/ MP3/ Windows Media™ Audio 2ch PCM 2ch PCMNote• In order to output PCM signal from DIGITAL OUT jack while outputting the HDMI audio signal,set “BD Audio Mode” to “Mix Audio Output” and set “HDMI Audio Out” to “HDMI Multi(LPCM)”.Cables not included.Please purchase the necessary cables at your local store.Connection to a Device with 2-channels of Analogue Audio InputsSupplied cables used in this connection are as follows:• RCA audio cable (L/R) x 1Note• When connecting to a 2-channel audio stereo device, use the 2ch AUDIO OUT jacks. If the 7.1chAUDIO OUT jacks are used, set “7.1ch Audio Out” in the “Audio” menu to “2 Channel” (Refer topage 33). For software recorded in multi-channel, analogue signals that have been down-mixedinto 2 channels are output. (For sources which are prohibited from down-mixing, only the FL/FRsignals are output.)Surround Connections to a Device with 7.1/5.1-channels of Analogue Audio InputsHDMI OUTETHERNETAC IN COAXIALCOMPONENT VIDEO OUTDIGITAL OUT( PCM / BITSTREAM )2ch AUDIO OUTLSBRFR SW7.1ch AUDIO OUTCFL SL SBLSRR2ch AUDIO OUTLRRLAUDIO INaudiothis unitRCA audio cableStereo componentCENTERSUB-WOOFERRSURROUNDLRSURROUNDBACKLRLROOMONTROLE2ch AUDIO OUTLSBRFR SW7.1ch AUDIO OUTCFL SL SBLSRRFRONTAV amplifieraudiothis unit