Denon DBP-2010 Owner's Manual

24Playback PlaybackENGLISHENGLISHIntroduction Connections Playback Function Setup OthersBD, DVD-Video, AVCHD and DivX® may have subtitles in 1 or morelanguages. Available subtitle languages can be found on the disccase. You can switch subtitle languages anytime during playback.1) During playback, press [SUBTITLE].2) Use [U / V] to select “Primary Subtitle”, “SecondarySubtitle” or “Subtitle Style”, then press [ENTER].“Primary Subtitle” : Sets the subtitle for the main picture.“Secondary Subtitle” : Sets the subtitle for the sub-picture.“Subtitle Style” : Sets style of the subtitle.3) Use [U / V] to select your desired subtitle.4) Press [SUBTITLE] to exit.1) During playback, press [SUBTITLE].2) Use [U / V] to select your desired subtitle.3) Press [SUBTITLE] to exit.You can enjoy stereo phonic virtual space through your existing2-channel stereo system.1) During playback, press [MODE] repeatedly until the virtualsurround setting appears.2) Use [U / V] to select “1” (Natural effect), “2” (Emphasisedeffect) or “Off”.3) Press [RETURN] to exit.Use this function to shut down unused circuitry to achieve highquality analogue sound.1) Press [PURE DIRECT] repeatedly to select your desired puredirect mode.• Each time you press [PURE DIRECT], the pure direct modechanges as “Normal” A “VideoOff” A “Disp.Off” A “All Off”A “Normal”. The modes will be displayed on the front paneldisplay.Video / audio outputs for each modeBD audio mode is to choose between two ways; you could outputthe secondary and interactive audio accompanied by the primaryaudio or you could output the primary audio only. Depending onthe setting of the mode, Dolby Digital, DTS, Dolby Digital Plus,Dolby TrueHD, or DTS-HD output changes between Multi PCMand bitstream.1) In stop mode with BD inserted, press [MODE].2) Use [U / V] to select desired setting. “Mix Audio Output”If it is available, BD-Video’s secondary and interactive audio will beoutput with the primary audio.• The secondary audio is the audio for the sub picture(Director’s comment etc.) and the interactive audio is theaudio for the interactive application (Button click soundsetc.). “HD Audio Output”Only the primary audio will be output. Set this mode in order tooutput Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS orDTS-HD sound of BD through HDMI connection.3) Press [RETURN] to exit.• You can also set “BD Audio Mode” from the setup menu.Refer to page 32.Selecting Subtitle LanguageNote• Some discs will only allow you to change the subtitle fromthe disc menu. Press [TOP MENU] or [POP UP MENU /MENU] to display the disc menu.• If 4-digit language code appears in the subtitle menu, refer to“Language Code” on page 47.• If the disc has no subtitle language or subtitle style, “NotAvailable” will be displayed.• For DivX®, the screen only displays the number of subtitlelanguages.BD-V DVD-V DivX®ΑVCHDBD-VSecondary SubtitlePrimary SubtitleSubtitle Style 2/252 ENG/112 ENG/11DVD-V AVCHD DivX®1 ENG /3Virtual SurroundNote• Select virtual surround “Off” or lower the volume if the soundis distorted.• This function cannot be used during dialogue speed (refer topage 18).• For the virtual surround, audio signal will always be 2-channelPCM.Pure Direct Mode[RETURN][ENTER][MODE][U / V / Y / Z][PURE DIRECT]BD-V DivX®DVD-V DVD-VR AVCHDCDMP3 WMAOffBD-V DivX®DVD-V DVD-VR AVCHDCDMP3 WMA“Normal” : Normal playback mode (pure direct modeis off).“VideoOff” : Video signal will not be output.“Disp.Off” : Circuitry for front panel display andindicators will be shut down.“All Off” : Video signal will not be output andcircuitry for front panel display andindicators will be shut down.Note• If you turn off the unit or put this unit to standby mode, thepure direct mode will go back to “Normal”.• [PURE DIRECT] is not available when the setup menu isdisplayed.Setting the BD Audio ModeNote• Refer to pages 13 - 14 for more information of audio settings.BD-V