Denon DCM-65/35 Operating Instructions Manual

Contents

9ENGLISHCONNECTIONS(1) Connecting the Output Terminal• Connect one end of the connection cord supplied with the CD Player tothe output terminals, left (L) and right (R) of the CD Player, and the otherend to the CD, AUX or TAPE PLAY input terminals, left (L) and right (R), ofthe amplifier.(3) SYNCHRO Jack Connections• Connect the SYNCHRO jack with a DENON cassette deck which isequipped with a SYNCHRO jack, then make a synchronized recording. Usethe connection cord supplied with the cassette deck.• To make use of this function, also connect the output jacks and make thesettings so that a recording can be made from the CD player to thecassette deck.COAXIALDIGITAL OUTLINE OUTVARIABLECONTROLOUTINSYNCHROAC OUTLETPHONO CD TUNER AUX TAPE-1/DATTAPE-2/MDTAPE-1/DATTAPE-2/MDLRPB RECSIGNALGNDINPUTSLRR LSPEAKER SYSTEMSAB(Amplifier) Power supply outletDCM-65/35OPEN/CLOSE DISC SKIP5 DISC AUTOMATIC DISC LOADING SYSTEMSTOP PAUSE PLAYPROGPHONESREPEATDCM-65PCM AUDIO TECHNOLOGY / CD AUTO CHANGERREMOTESENSORHDCD£¢ ON OFFTRACK 152 3 46 7 89 10111213141516DISC MIN SEC¤ ‚⁄ ‚‹ fi‚12345( 1 PLAY )NORMAL PLAYFollow the steps below to get an understanding of the disc playprocedure.1. Turn the power switch on and press the open/close (5 OPEN/CLOSE)button to open the drawer.2. Set the disc to be played in the front side tray.3. Press the play button (1).4. The drawer closes and the disc just loaded is played.5. The disc number, track number and elapsed time, etc., for the disccurrently playing appear on the display window.6. If the open/close (5 OPEN/CLOSE) button is pressed while a disc isplaying, playback continues, but the drawer opens and four discs can bereplaced. The disc that can be replaced switches when the DISC SKIPbutton is pressed.Press the open/close (5 OPEN/CLOSE) button again to close the drawer.(1) Starting Playback(2) Stopping PlaybackOPEN/CLOSE DISC SKIP5 DISC AUTOMATIC DISC LOADING SYSTEMSTOP PAUSE PLAYPROGPHONESREPEATDCM-65PCM AUDIO TECHNOLOGY / CD AUTO CHANGERREMOTESENSORHDCD£¢ ON OFFTRACK 152 3 46 7 89 10111213141516DISC MIN SEC¤ ‚⁄ ‚‹ fi‚12345( 2 STOP )1. Press the stop button (2 STOP) to stop playback.2. To replace discs, press the open/close (5 OPEN/CLOSE) button.The disc which was playing switches over to the front side and the draweropens.OPEN/CLOSE DISC SKIPSTOP PAUSE PLAYPROGPHONESREPEAT5 DISC AUTOMATIC DISC LOADING SYSTEMDCM-65PCM AUDIO TECHNOLOGY / CD AUTO CHANGERREMOTESENSORHDCD£¢ ON OFFTRACK 152 3 46 7 89 10111213141516DISC MIN SEC¤ ‚⁄ ‚‹ fi‚12345• Set the disc you want toplayed in the front side.COAXIALDIGITAL OUTLINE OUTVARIABLECONTROLOUTINSYNCHRO(Cassette Deck) Power supply outletDCM-65/35(2) Connecting the Digital Output Jack (COAXIAL) (DCM-65 only)• Use a 75 Ω/ohm pin cord to connect the digital output jack (COAXIAL) ofthe DCM-65 to the digital input jack (COAXIAL) on a digital processor orMD recorder, available in stores.COAXIALDIGITAL OUTLINE OUTVARIABLECONTROLOUTINSYNCHRODIGITAL INPUTCOAXIALOPTICALPower supply outletDCM-65/35Digital processor or MD recorder