10Playing MP3 Files on a CDTo play MP3 files on a CD:1. If the unit is off, press the Power button to power it on.Important: Do not insert a CD when the power is off. Doing so may damage the unit. When powering on the unit,hold the Eject button to engage Force Eject Mode.2. Insert a CD into the CD slot. (Hold the edges of the CD without touching the recorded surface. Be careful not totrap your fingers when the disc is drawn into the unit.)3. Select CD as your desired media type: (described in Selecting the Media Playback Mode).4. Select an audio file:• To move through audio files, turn the Jog Dial on the unit.• Press one of the Number buttons (0–9) to enter the desired track number. If the track number is two digits,press the buttons in succession (e.g., 1 then 2 for Track 12).In CD Mode, you can perform any of the following operations:• To start, resume, or pause playback, press the Play/Pause button.• To stop playback, press the Stop button.• To rewind or fast-forward through the track, press and hold one of the Search buttons. The track willrewind/fast-forward at 5 times the normal playback speed. To resume playback, release the button.• To select a Repeat Playback mode, press the Repeat button. It will cycle through Repeat One (the sametrack will repeat indefinitely), Repeat All (the list of all tracks will repeat indefinitely), and Repeat Off (no trackswill repeat).• To select the Play Mode, press the Random button. It will cycle through Random (the tracks will play in arandom order [for up to 256 tracks]), and Single Play () (the current track will play until its end and then stop).• To change the Time Mode in the display, press the Time button. It will cycle through Elapsed (how much timehas elapsed of the current track), Remaining (how much time remains of the current track), and Total Remaining(how much time remains for the total audio CD).• To eject a CD, press the Eject button. Ejecting will appear in the display while ejecting the CD. No Disc willappear when there is no disc in the CD slot.