Denon DN-500CB User Manual

Contents

9Selecting the Media Playback ModeTo select what kind of media you want to play:To cycle through the available options, press the CD/AUX/USB/BT button.• CD: audio CD, CD-DA, CD-ROM, or MP3, or CD with audio files (CDR) (see Playing Audio CDs)• Aux: device connected to Aux In (see Playing Audio from an External Device)• USB: USB device (mass storage class) (see Playing Audio Files On a USB Flash Drive)• Bluetooth: Bluetooth device (see Playing Audio from a Bluetooth Device)Playing Audio CDsTo play audio CDs:1. If the unit is off, press the Power button to power it on.Important: Do not insert a CD when the power is off. Doing so may damage the unit.2. Insert a CD into the CD slot. (Hold the edges of the CD without touching the recorded surface. Be careful not totrap your fingers when the disc is drawn into the unit.)3. Select CD as the media type (described in Selecting the Media Playback Mode).The CD will start playing automatically when Power-On Play mode is active.In CD Mode, you can perform any of the following operations:• To start, resume, or pause playback, press the Play/Pause button.• To stop playback, press the Stop button.• To rewind or fast-forward through the track, press and hold one of the Search buttons. The track willrewind/fast-forward at 5 times the normal playback speed. To resume playback, release the button.• To skip directly to a track:1. If in Pause, Stop, or Play mode, press one of the Number buttons (0–9) to enter the desired track number. Ifthe track number is two digits, press the buttons in succession (e.g., 1 then 2 for Track 12). Alternatively, turnthe Jog Dial to select a track and press the Jog Dial to load the track.2. If a track was paused, press the Play/Pause button after loading the track to have it begin playback. If atrack was playing before selecting a track, the new track will play once selected.• To select a Repeat Playback mode, press the Repeat button. It will cycle One (the same track will repeatindefinitely), Repeat All (the list of all tracks will repeat indefinitely), and Repeat Off (no tracks will repeat).• To select the Play Mode, press the Random button. It will cycle through Random (the tracks will play in arandom order [for up to 256 tracks]), and Single Play () (the current track will play until its end and then stop.• To change the Time Mode in the display, press the Time button. It will cycle through Elapsed (how much timehas elapsed of the current track), Remaining (how much time remains of the current track), Total Elapsed Time(how much time has elapsed of all remaining tracks), and Total Remaining (how much time remains of allremaining tracks. This applies only to CDs.)• To eject a CD, press the Eject button when the unit is stopped or paused. Ejecting will appear in the displaywhile ejecting the CD. No Disc will appear when there is no disc in the CD slot.Important: Please see Other Information > CDs to learn more about the types of CDs the DN-500CB supports andfor more information about CD handling and care. When powering on the unit, hold the Eject button to engage ForceEject Mode.