Denon DRA-397 Operating Instructions Manual

Also see for DRA-397: Service manual Brochure & specs Operating instructions

Contents

Operation Operation13ENGLISHUse FUNCTION to select “TUNER” or press [TUNER].Auto tuningManual tuningPress MODE to set the auto tuning mode.• The “AUTO” indicator lights.Press TUNING.• Automatic searching begins.• If tuning does not stop at the desired station, use to the “Manualtuning” operation.• “AM” or “FM” can be selected directly by pressing [FM/AM].Use FUNCTION to select “TUNER” or press [TUNER].Press MODE to set the manual tuning mode.Check that the display’s “AUTO” indicator turns off.Press BAND to select “AM” or “FM”.Press BAND to select “AM” or “FM”.Press TUNING.The frequency changes continuously when the button is held in.12341234• When the manual tuning mode is set, FM stereo broadcasts arereceived in monaural and the “STEREO” indicator turns off.• “AM” or “FM” can be selected directly by pressing [FM/AM].About the button names in this explanation< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only :Buttons on the main unit and remote control unitSTATUS[FM/AM]SHIFT [CHANNEL][D H F G]FUNCTIONXM RADIOTUNINGMEMORY[TUNER]MODEBAND[MEMORY BLOCK]FUNCTION[NUMBER](0 ~ 9, +10)FUNCTION MODESTATUSBAND SHIFTMEMORYTUNINGXM RADIOENGLISHUse the “Auto tuning” or “Manual tuning” operationto tune in the station to be preset in the memory.Press MEMORY.Press , [CHANNEL] or [NUMBER] to selectthe desired preset channel (1 to 8).Preset memoryPress [MEMORY BLOCK] (A to G) or SHIFT to selectthe desired memory block (A to G).Press MEMORY again.• Store the station in the preset memory.12345• To preset other channels, repeat steps 2 to 4.A total of 56 broadcast stations can be preset — 8 stations (channels1 to 8) in each of blocks A to G.Recalling preset stationsPress [MEMORY BLOCK] (A to G) or SHIFT to selectthe memory block.Press , [CHANNEL] or [NUMBER] to selectthe desired preset channel.12