Connections Connections9ENGLISHConnecting the iPod®iPodASD-1RAAUDIO OUTRRL LWhen using an iPod, you must connect the Control Dock for iPod (ASD-1R, sold separately) and the DOCKCONTROL jack on the DRA-697CI with a mini-jack and assign the iPod to any AUDIO terminal(s).The diagram below shows an example of connections for when the iPod is assigned to the CD-R/TAPEterminals.For instructions on assigning the iPod to a specific terminal, see “Setting the iPod Assignment” (page 11).For instructions on playing the iPod, see “Playing the iPod” ( page 17).• The optional standard Control Dock for iPod is DENON ASD-1R sold separately.ENGLISHMonitor (S VIDEO IN)Connecting the MULTI ZONE terminalsMonitor(ZONE2)VIDEOINPower amplifier(ZONE2 or ZONE3)RLINGRLRLA++AUX OUTExtension terminal for future use.Infrared sensorInfrared retransmitterFor instructions on operations using the MULTI ZONE functions ( page 19).ZONE2 (or ZONE3) PRE OUT connections• If another power amplifier or pre-main (integrated) amplifier is connected, the ZONE2 (or ZONE3) pre-out (variable or fixed level) terminals can be used to play a different program source in ZONE2 (orZONE3) the same time ( page 19).• The ZONE2 video out is only for the ZONE2.• The ZONE3 video out is only for the ZONE3.Monitor(ZONE2 or ZONE3)Power amplifier(ZONE2 or ZONE3)• For the AUDIO output, use high quality pin-plug cables and wire in such a way that there is no hummingor noise.• For instructions on installation and operation of separately sold devices, refer to the devices’ operatinginstructions.Input Output