Denon DRA-697CI Operating Instructions Manual

Also see for DRA-697CI: Specification Brochure & specs Code List Manual Operating instructions

Operation Operation14ENGLISHUse FUNCTION or press [FM/AM] to select“FM/AM”.Auto tuningManual tuningPress MODE to set the auto tuning mode.• The “AUTO” indicator lights.Press TUNING.• Automatic searching begins.• If tuning does not stop at the desired station, use to the “Manualtuning” operation.• “AM” or “FM” can be selected directly by pressing [FM/AM].Use FUNCTION or press [FM/AM] to select“FM/AM”.Press MODE to set the manual tuning mode.Check that the display’s “AUTO” indicator turns off.Press BAND to select “AM” or “FM”.Press BAND to select “AM” or “FM”.Press TUNING.The frequency changes continuously when the button is held in.12341234• When the manual tuning mode is set, FM stereo broadcasts arereceived in monaural and the “STEREO” indicator turns off.Use the “Auto tuning” or “Manual tuning” operationto tune in the station to be preset in the memory.Press MEMORY.Press , [CHANNEL] or [NUMBER] to selectthe desired preset channel (1 to 8).Preset memoryPress [MEMORY BLOCK] (A to G) or SHIFT to selectthe desired memory block (A to G).Press MEMORY again.• Store the station in the preset memory.12345• To preset other channels, repeat steps 2 to 5.A total of 56 broadcast stations can be preset — 8 stations (channels1 to 8) in each of blocks A to G.Recalling preset stationsPress [MEMORY BLOCK] (A to G) or SHIFT to selectthe memory block.Press , [CHANNEL] or [NUMBER] to selectthe desired preset channel.12Listening to the radioPress ENTER.• The unit automatically begins searching for FM broadcaststations.When the first FM broadcast station is found, that station isstored in the preset memory at channel A1.Subsequent stations are automatically stored in order at presetchannels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1 to E8, F1 toF8 and G1 to G8 for a maximum of 56 stations.Channel A1 is tuned in after the auto preset memory operation iscompleted.Auto preset memoryThis unit is equipped with a function for automatically searching forFM broadcast stations and storing them in the preset memory.• If an FM station cannot be preset automatically due to poorreception, use the “Manual tuning” operation to tune in the station,then preset it using the manual “Preset memory” operation.• To interrupt this function, press .¢ Default settingsAuto tuner presetsA1 ~ A8 87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 /90.1 MHzB1 ~ B8 520 / 600 / 1000 / 1400 / 1500 / 1710 kHz,90.1 / 90.1 MHzC1 ~ C8 90.1 MHzD1 ~ D8 90.1 MHzE1 ~ E8 90.1 MHzF1 ~ F8 90.1 MHzG1 ~ G8 90.1 MHzWith the function set to “FM/AM”, press MENU.• “Auto Preset” is displayed.12Check that the remote control unit is set to “A”.ENGLISH